Sliding Patio Doors Repair
Patio doors that slide open are a great way to enjoy your outdoor space, but they can be difficult to open and close. This can be due to a number of issues, such as dirty tracks or misaligned rollers.
Start by cleaning the track and lubricating the rollers. You can also adjust the rollers using the adjustment holes located on the bottom of the door panel with movable doors.
Tracks that are damaged or dirty
A dirty or damaged track can cause a sliding door to not slide properly. Over time, dirt, grit, and even rust may accumulate making the track unable to slide smoothly. The solution is a thorough cleaning using a brush and mild detergent. This job should be done regularly to ensure smooth operation and prevent expensive repairs in the future.
A door that is leaky is another common issue that requires prompt attention to prevent the growth of mold, water damage and structural damage. Often the problem stems from damaged weather stripping or misaligned doors, which can be corrected by replacing the weather stripping and aligning the door.
Another common problem that can be resolved with some DIY work is when rollers jump off their tracks. Find a friend to assist you in this endeavor as the door could be heavy. Stand inside the house, and lean the panel in front of you to reposition the rollers. When the panel is lifted off the bottom track, it's time to place it on sawhorses in order to keep it from falling off. Then, loosen the screws that keep each roller in place and take them off using the help of a screwdriver. You can now clean any dirt that is caught between the wheels and the tracks. Then, clean each wheel with denatured alcohol on a rag. Reposition the wheels to their tracks and then attach them once more.
It may be possible to straighten a bent section of track with a rubber mallet, and a block of wood. However in the event that the bent portion is close to the hinges and has the potential to cause further damage, you'll be better off calling a professional to ensure safety.
Rollers that are misaligned
If your sliding door isn't sliding as smoothly it's because the roller wheels are misaligned with the track. The wheels could be dirty or rusted, and their bearings are worn down. This friction causes the door to catch and grind when opened or closed. This can also cause the sound of squeaking.
Fortunately, this is an easy fix. The wheels are attached to a bracket which can be adjusted, so you don't need to remove the door. Use a screwdriver to find the holes for adjustment on the frame (usually either side). Turn the screws to turn the wheels. Turning the screw clockwise will raise the wheel, while turning it counterclockwise lowers it. Continue to adjust until the door moves smoothly and quietly when open or closed.
It is essential to adjust the wheel prior to making adjustments to your latch. In order for the lock to function properly the latch hooks have to be aligned with the strike plate. If you don't, the latch could open or close while you're not in the room.
Sliding patio door are an investment. Maintaining them in good condition will keep your family safe. By addressing common issues like broken tracks, rollers and handles, you can avoid expensive repairs in the future. Contact our team to learn more about patio doors. We will assess your needs for repair of your sliding patio door and help you keep it in top condition. Our professionals can also help with any replacement parts you might require.
The door frame is loose or damaged
Sliding patio doors are a wonderful option for any home and offer a stylish and practical alternative to swing-open or hinged patio door options. However, like any other hardware that they are, they could face various issues in time. A lot of these issues can be fixed with a bit of DIY expertise.
A gap in the frame is a typical problem with sliding patio doors. This can be due to a variety of factors, including rollers or tracks that are not aligned properly, a damaged track or door, or a bent frame for the door. In the majority of cases, the problem is easily solved by removing the doors and reconnecting the track. It is essential to be careful not to cause damage to either the frame or track.
In some cases, it may be necessary to replace the entire track. This can be done easily with an universal replacement kit that is readily available at major hardware stores. These kits are simple to install and will have your door functioning correctly in no time.
It is important to inspect your sliding door frame and hardware for signs of wear and tear, for instance loose screws or bolts. These are usually tightened with a screwdriver or wrench and is a simple and efficient DIY patio door maintenance step. Additionally, it is important to grease your rollers and tracks to make sure they operate smoothly and to prevent premature wear.
For many homeowners the patio doors are the primary entry point to their backyard as well as outdoor living space. They need to to function correctly to ensure the safety of their home and provide security. By following these simple DIY maintenance techniques, homeowners can prolong the life of their patio door and reduce costly repairs or replacements.
A faulty handle
The sliding patio doors are an excellent way to get into your home and gain access to your backyard, but they can be difficult to operate if they are not aligned properly. A defective handle can cause the door to not open or close properly. Fixing a loose handle can be accomplished at home.
In many cases, a loose handle is merely the result of screws working into the backplate. To fix this issue, simply tighten the two screws that are on the inside of the handle with the help of a screwdriver. If patio door repairs near me find that the handle is still loose, it could be a sign that the threads have worn and will need to be replaced.
A broken latch may be the cause. It is more likely the latch will break if it's made of metal, rather than plastic. If the latch is not catching or turning, you should try oiling it first to see if it aids. If not, you may need to replace the lock entirely.
If the handle is damaged or broken, it could be difficult to operate. If this happens, you will need to replace the handle with one that is in line with the style and design of your sliding patio doors.
Feldco can help restore your patio doors back to their former splendor, no matter if they are brand new or old and old-fashioned. We offer high-quality doors in different sizes and styles that can be installed to perfectly fit your home. For more information about our products, contact us now! We offer services to Southern California homeowners, including Ventura County and Orange County.
Faulty Weatherstripping
It's time to upgrade your weather stripping if see light around closed doors and windows, or sense a draft pulsing at the window or door. These strips create a tight seal that blocks unwanted air, pests, or water from getting into your home. This helps keep your heated and conditioned air in, thereby saving money on energy bills.
It may have lost its strong, bouncy seal due to aging. This is easy to diagnose by using a dollar bill and putting it under the seal on top of the door frame and at the bottom of the door jamb where they overlap. If the dollar bill slides easily between the seal and door with ease, it is time to replace the weatherstripping.
It's tempting to cut out only the worn portion of weather stripping and replace it, but this could result in cracks on the sides of the new stripping and could cause issues with the seal in the future. It is much more effective to replace the entire stripping. This will let you rest at ease knowing that your door will be sealed properly.
Follow our DIY guide to weather stripping to put the right material on your sliding patio door, and frame to ensure a strong and long-lasting seal. This is a great way to save energy costs and repair your sliding patio door. Don't wait until its too late. Your wallet and your home will be thankful.